| About |
|---|
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | HC PP |
| Material Status | Commercial: Active |
| Features | Flame Characteristics,Good Tensile Strength,High impact resistance,Excellent Processability,Good Dimensional Stability,High Heat Resistance,Good Rigidity,HB,Low warping,High liquidity |
| Availabilitys | Asia Pacific,North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| Molding shrinkage | |||
| MD：2.0 mm | 0.20 to 0.90 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃ | 120 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa, unannealed | 162 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 110 | ASTM D785 | |
| Tensile Strength | 98.1 | MPa | ASTM D638 |
| Tensile Strain | |||
| Broken BRK | 10 | % | ASTM D638 |
| Flexural Modulus | |||
| 23℃ | 132 | MPa | ASTM D747 |
| Flexural Modulus | 5880 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Rear Temperature Zone 1 | 200 to 240 | °C | |
| Middle Temperature Zone 2 | 200 to 240 | °C | |
| Front Temperature Zone 3 | 200 to 240 | °C | |
| Mold Temperature | 50 to 80 | °C | |
| Injection pressure | 58.8 to 108 | MPa | |
| Back Pressure | 0.490 to 0.981 | MPa | |
| Screw Speed | 30 to 80 | rpm | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |