| About |
|---|
| RB230 is a propylene-ethylene random copolymer grade for blow molding applications. This resin is suited to bottles and containers requiring high clarity such as cosmetics, beverage, shampoo, and medical bottles.&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,High impact resistance,Nucleation,Random copolymer |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.90 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 1.50-1.80 | % | ASTM D995 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.00 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 80 | R 级 | ASTM D785 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 90 | ℃ | ASTM D648 |
| Melting temperature | 148 | ℃ | DSC |
| Vicat Softening Temp | |||
| A50 | 130 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |