Hanwha Total PP RJ710

About
Description RJ710 is a propylene-ethylene random copolymer for manufacturing injection molding articles, especially anti x-ray medical device. This grade doesn’t contain “Endocrine disruptor”. In addition, the well-balanced comonomer design & nucleation technology of RJ710 provide the final products with good appearance and mechanical performance. Characteristics Excellent x–ray sterilization stability and comply with USP Class VI High flowability, Excellent transparency and appearance Wide Processing window; Productivity increase: cycle time reduction by faster crystallization Applications Medical syringe, labware, centrifuge tube, tray, injection molding&&

About

Description RJ710 is a propylene-ethylene random copolymer for manufacturing injection molding articles, especially anti x-ray medical device. This grade doesn’t contain “Endocrine disruptor”. In addition, the well-balanced comonomer design & nucleation technology of RJ710 provide the final products with good appearance and mechanical performance. Characteristics Excellent x–ray sterilization stability and comply with USP Class VI High flowability, Excellent transparency and appearance Wide Processing window; Productivity increase: cycle time reduction by faster crystallization Applications Medical syringe, labware, centrifuge tube, tray, injection molding&&

Product Description
Supplier	HANWHA
Generic	PP copolymer
Material Status	Commercial: Negative
Features	Excellent Processability,Good Clarity,Good surface appearance,High liquidity,Nucleation,Food contact compliance,Random copolymer
Availabilitys	North America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	49	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	95.0	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
Haze
2000 µm	20	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	85		ASTM D785
tensile strength
yield	30.4	MPa	ASTM D638
Tensile strain
fracture	500	%	ASTM D638
Bending modulus	1180	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.