| About |
|---|
| SE87 Thermoplastic Elastomer is a dynamically fully cured thermoplastic elastomer. There is no vulcanization, and this is shipped pre-mixed an ready to process. This can be processed on extrusion,injection and blow molding equipment for faster molding cycle times and lower per-part costs.&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good Dimensional Stability,Renewable resources,Quick molding cycle,Grease resistance,Solvent resistance |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.930 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 5 seconds | 87 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 15.0 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 520 | % | ASTM D412 |
| tear strength | 59.8 | kN/m | ASTM D624 |
| Compression deformation | |||
| 25℃，70 hr | 45 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -58.0 | ℃ | ASTM D746 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 190 to 200 | °C | |
| Barrel middle temperature | 185 to 195 | °C | |
| Barrel front temperature | 180 to 190 | °C | |
| Processing (melt) temperature | 210 | °C | |
| Mold temperature | 30.0 to 60.0 | °C | |
| Barrel 1 zone temperature | 180 to 190 | °C | |
| Barrel 2 zone temperature | 185 to 195 | °C | |
| Barrel 3 zone temperature | 190 to 200 | °C | |
| Connector temperature | 200 to 210 | °C | |
| Nozzle temperature | 210 to 220 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |