Hapflex™ 766

About
HAPFLEX 700 & 800 products are a series of low hazard, colorless, high strength, elastomers available in Shore hardnesses from 65A to 72D. HAPFLEX 700 & 800 products exhibit high tensile strength, high tear strength, and excellent elongation. All HAPFLEX 700 & 800 products cure at room temperature and can be accelerated with heat. Another key attribute of the 700 & 800 SERIES is that the base color of all components is colorless. For user convenience, HAPCO has designed this series in 2 speeds so the user can “customize” production rates and cure times. The fast and regular versions can be blended to user customize the gel time and cure time. HAPFLEX 700 & 800 SERIES can be used for mechanical, electrical, and mechanical/electrical applications. In addition, HAPFLEX 700 & 800 products show superior water immersion properties and superior adhesion when used in combination with Hapco’s one part PRIMER 200.&&

About

HAPFLEX 700 & 800 products are a series of low hazard, colorless, high strength, elastomers available in Shore hardnesses from 65A to 72D. HAPFLEX 700 & 800 products exhibit high tensile strength, high tear strength, and excellent elongation. All HAPFLEX 700 & 800 products cure at room temperature and can be accelerated with heat. Another key attribute of the 700 & 800 SERIES is that the base color of all components is colorless. For user convenience, HAPCO has designed this series in 2 speeds so the user can “customize” production rates and cure times. The fast and regular versions can be blended to user customize the gel time and cure time. HAPFLEX 700 & 800 SERIES can be used for mechanical, electrical, and mechanical/electrical applications. In addition, HAPFLEX 700 & 800 products show superior water immersion properties and superior adhesion when used in combination with Hapco’s one part PRIMER 200.&&

Product Description
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	Good Rigidity,Low or no water absorption,Good bond,Good Tensile Strength,Good tear strength,Insulation
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D4669
Shrinkage rate
MD	0.10 to 0.30	%	ASTM D2566
Weight（per cubic inch）	17	g

elastic body	Nominal value	Unit	Test method
tear strength	29.8	kN/m	ASTM D624

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	无断裂		ASTM D256
Notched impact strength of cantilever beam	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Thermosetting components
Component A	按重量计算的混合比: 100, 按容量计算的混合比: 100
Component B	按重量计算的混合比: 20, 按容量计算的混合比: 20

Thermosetting mixed viscosity	Nominal value	Unit	Test method
25℃	4000	cP	ASTM D4878
stripping time
21℃	960 to 1400	min	Internal Method
Gelation time
25℃	23.0	min	ASTM D2971

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	65		ASTM D2240
tensile strength	5.52	MPa	ASTM D638
Tensile strain
fracture	950	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die C
3. 100 g
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.