Hax™ HFC 0115/1

About
Hax is a range of thermoplastic, halogen free and flame retardant compounds based on polyolefines and specific mineral fillers. These grades can be used for insulation, sheathing and bedding of cables installed in environments where low flammability and low smoke emission during combustion is of vital importance.&&

Product Description
Generic聚烯烃,共挤薄膜用聚烯烃
Material StatusCommercial: Active
FeaturesLow smoke,Halogen free,Flame Characteristics
AvailabilitysAfrica & Middle East ,North America,Latin America,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.88 to 1.92g/cm³ISO 1183
Melt Flow Rate
280℃,0.325kg82 to 92g/10minISO 1133

MECHANICALNominal valueUnitTest method
Shore hardness
Shore D, 15 seconds28 to 34 ISO 868

FLAME CHARACTERISTICSNominal valueUnitTest method
Extreme oxygen index52 to 58%ISO 4589-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.