| About |
|---|
| Product Description | |
|---|---|
| Supplier | British Petroleum |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| Basic performance | Nominal value | Unit | Test method |
| Melt flow rate | |||
| 2.16kg | 0.2 | g/10min | ISO 1133 |
| Density | |||
| Annealed | 954 | kg/m³ | ISO 1872 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bottle stress crack resistance | |||
| 60℃ | 6 | hours | internal method |
| elongation at break | |||
| 23 ℃, Type 2, Rate D | >300 | % | ISO 527 |
| Bending modulus | |||
| 23℃@100mm/min | 1050 | MPa | ISO 178 |
| Pendulum impact strength | 12 | KJ/m² | ISO 179 |
| Yield tensile strength | |||
| 23 ℃, Type 2, Rate D | 26 | MPa | ISO 527 |
| BTT stress crack resistance | |||
| F50at50℃,100% | 50 | hours | ASTM D-1693 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |