| About |
|---|
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Corrosion Resistant,High ESCR |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | 26 | MPa | ASTM D638，ISO 527 |
| Bending modulus | 1280 | MPa | ASTM D790/ISO 178 |
| Tensile strain | |||
| yield | 9 | % | ASTM D638，ISO 527 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，6.4mm | 180 | J/m | ASTM D256，ISO 179 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt Flow Rate | |||
| 200℃，5.0kg | 11 | g/10min | ASTM D1238，ISO 1133 |
| Density | 0.951 | g/cm³ | ASTM D792，ISO 1183 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 128 | ℃ | ASTM D1525/ISO R306 |
| melting point | 133 | ℃ | – |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |