| About |
|---|
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.964 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.75 | g/10min | ISO 1133 |
| 190°C，5.0kg | 22 | g/10 min | ISO 1133 |
| Shrinkage rate | |||
| MD | 2.1 | % | ASTM D955 |
| Spiral flow | |||
| 250℃，2 sec | 73.5 | Internal Method | |
| ESCR(Environmental Stress Cracking Resistance) | |||
| Molded into shape, 100% non-ionic detergent, | 2.5 | hrs | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength | |||
| Yield, molding | 29.0 | MPa | ASTM D638 |
| Fracture, molded | 32.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 800 | % | ASTM D638 |
| Bending modulus | |||
| 1050 | MPa | ASTM D790 | |
| Shaw hardness | |||
| D-grade, molded | 66 | ISO 868 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Notch Impact Strength | 77 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 131 | ℃ | ISO 306/A |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |