| About |
|---|
| Hepla® H7040LGF is a Polyamide 12 (PA 12) product filled with 40% long glass fiber.Characteristics include:Shock Resistant. It is available in Asia Pacific,Europe,or North America. |
| Product Description | |
|---|---|
| Supplier | NFD |
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Low or no water absorption,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.31 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 9923 | MPa | ASTM D638 |
| tensile strength | 147.5 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 2 to 2.9 | % | ASTM D638 |
| Bending modulus | 8098 | MPa | ASTM D790 |
| bending strength | 238.2 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.20 mm | 366 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| 3.2 mm | 1279 | J/m | ASTM D4812 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.8 mm | HB | IEC 60695-11-10, -20 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 35.4 | kV/mm | IEC 60243-1 |
| Volume resistivity | 1.00E+13 | Ohm•cm | IEC 60093 |
| Surface resistivity | 1.00E+12 | Ohms | IEC 60093 |
| Compared to the leakage tracing index | 600 | V | IEC 60112 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 8 MPa, flat 80 * 10 * 4, span 64mm, unannealed | 140 | ℃ | ISO 75/Cf |
| 1.8 MPa, flat 80 * 10 * 4, span 64mm, unannealed | 170 | ℃ | ISO 75/Af |
| Continuous use temperature | |||
| long-term | 90 to 120 | ℃ | ISO 2578 |
| short-term | 150 | ℃ | NFD Method |
| Melting temperature | |||
| 10℃/min | 178 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |