| About |
|---|
| Hepla® H7150GF is a Polyamide 6 (Nylon 6) product filled with 50% glass fiber. for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-goods industry. Application: grips of electrotools, hobby tools, gears, covers of electric appliances, cooling skrews of blowers, electromotors, carrying parts in the automotive industry. Delivered in natural mode and in the full RAL colour scale. |
| Product Description | |
|---|---|
| Supplier | NFD |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Chemical coupling,Ultra high toughness |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.58 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃/2.16 kg | 10 | g/10 min | ISO 1133 |
| Shrinkage rate | |||
| TD | 0.1 | % | STM 64 0808 |
| MD | 0.2 | % | STM 64 0808 |
| Water absorption rate | |||
| 23℃，24 hrs | 0.9 | % | ISO 960 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 14500 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 235 | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | 3 | % | ISO 527-2 |
| Bending modulus | 13800 | MPa | ISO 178 |
| bending strength | 320 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -20℃ | 15 | kJ/m² | ISO 179 |
| 23℃ | 16 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | |||
| -20℃ | 85 | kJ/m² | ISO 179 |
| 23℃ | 90 | kJ/m² | ISO 179 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 | |
| Igniting temperature of the hot wire | 650 | ℃ | IEC 60695-2-13 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 215 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | 215 | ℃ | ISO 306/B |
| Melting temperature | |||
| DSC | 225 | ℃ | ISO 3146 |
| Process Conditions | |||
|---|---|---|---|
| injection molding | Nominal value | Unit | Test method |
| drying temperature | 80 | ℃ | |
| Drying time | 4 | hr | |
| Melt Temperature | 250 to 280 | % | |
| Mold temperature | 70 to 90 | ℃ | |
| Injection pressure | 70.0 to 120 | MPa | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |