| About |
|---|
| TPS-SEBS Thermoplastic Elastomer. 40 Shore A. Low density, rubber like surface, easy flowing. Application examples: Soft grips&& |
| Product Description | |
|---|---|
| Supplier | Radici |
| Generic | SEBS |
| Material Status | Commercial: Negative |
| Features | Good liquidity,Low density |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 40 | ISO 868 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 37 | ||
| fracture | 6.00 | MPa | ISO 37 |
| 100% strain | 0.900 | MPa | ISO 37 |
| 300% strain | 1.40 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | > 300 | % | ISO 37 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |