Hetron™ FR 650 INF-20

About
HETRON FR 650 Series resins are flame retardant polyester resins. Composites made with HETRON FR 650 Series resins have been tested and have achieved a Class 1 Flame Spread per ASTM E-84 without addition of synergists such as antimony trioxide. HETRON FR 650 INF-20 resin is a low viscosity promoted resin optimized for the infusion process. This grade may also be used for resin transfer molding. It exhibits excellent glass wet out properties. APPLICATIONS AND USE HETRON FR 650 Series resins, depending on the grade selected, can be used in hand lay-up, spray-up, filament winding and infused flame retardant applications. Markets include architectural, mass transit, passenger rail, electrical and mine ducting.&&

About

HETRON FR 650 Series resins are flame retardant polyester resins. Composites made with HETRON FR 650 Series resins have been tested and have achieved a Class 1 Flame Spread per ASTM E-84 without addition of synergists such as antimony trioxide. HETRON FR 650 INF-20 resin is a low viscosity promoted resin optimized for the infusion process. This grade may also be used for resin transfer molding. It exhibits excellent glass wet out properties. APPLICATIONS AND USE HETRON FR 650 Series resins, depending on the grade selected, can be used in hand lay-up, spray-up, filament winding and infused flame retardant applications. Markets include architectural, mass transit, passenger rail, electrical and mine ducting.&&

Product Description
Generic	热固性聚酯
Material Status	Commercial: Active
Features	Good Rigidity,Low Viscosity,Flame Characteristics
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Solution viscosity	180	mPa·s
Solid content	60	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	3520	MPa	ASTM D638
tensile strength	77.2	MPa	ASTM D638
Tensile strain
fracture	2.7	%	ASTM D638
Bending modulus	3520	MPa	ASTM D790
bending strength	123	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	68.9	℃	ASTM D648

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.