HFDB-4201 EC - SOLIAO

About
HFDB-4201 is a long-life, unfilled, crosslinkable, low density, polyethylene insulation compound designed for medium and high voltage (5 kV and higher) power cable insulation applications. It has a very low level of contamination and bears the designation Extra Clean (EC). HFDB-4201 EC has been designed to have an extremely low level of additive bloom for a long storage life, low dusting, and an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. Specifications HFDB-4201 EC is designed for use in power distribution and sub-transmission cables. Cables insulated with HFDB-4201 EC, using sound commercial fabrication manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 AEIC: CS8 RUS: 50-70 (U-I) CEA: WCWG-01, WCWG-02 UL 1072 IEC: 60502, 60840 CENELEC: HD 620 S1/A3, HD 632 S2, HD 629 S1 DIN VDE: 0207, DIN VDE 0276-620 BSI BS: 6622 GB/T 12706&&

About

HFDB-4201 is a long-life, unfilled, crosslinkable, low density, polyethylene insulation compound designed for medium and high voltage (5 kV and higher) power cable insulation applications. It has a very low level of contamination and bears the designation Extra Clean (EC). HFDB-4201 EC has been designed to have an extremely low level of additive bloom for a long storage life, low dusting, and an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. Specifications HFDB-4201 EC is designed for use in power distribution and sub-transmission cables. Cables insulated with HFDB-4201 EC, using sound commercial fabrication manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 AEIC: CS8 RUS: 50-70 (U-I) CEA: WCWG-01, WCWG-02 UL 1072 IEC: 60502, 60840 CENELEC: HD 620 S1/A3, HD 632 S2, HD 629 S1 DIN VDE: 0207, DIN VDE 0276-620 BSI BS: 6622 GB/T 12706&&

Product Description
Supplier	DOW
Generic	LDPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D792
The degree of cross combination (Extractables)	< 20	%	ASTM D2765A

MECHANICAL	Nominal value	Unit	Test method
tensile strength	20.7	MPa	ASTM D638
Tensile strain
fracture	530	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
High temperature creep
200℃	< 100	%	ICEA T-28-562
thermosetting
200℃	< 10	%	ICEA T-28-562

Electrical performance	Nominal value	Unit	Test method
Volume resistivity
23℃	> 1.0E+15	ohms·cm	ASTM D257
Dielectric strength			ASTM D149
3.18 mm	26	kV/mm	ASTM D149
3.18 mm	23	kV/mm	ASTM D149
Dielectric constant
60 Hz	2.30		ASTM D150
Dissipation factor
60 Hz	3.0E-4		ASTM D150

Notes
1. Typical properties: these are not to be construed as specifications.
2. Method A (Short-Time)
3. Method B (Step-by-Step)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.