| About |
|---|
| HFDG-4201 is a low-density, crosslinkable, unfilled polyethylene compound designed for use in power cable applications of 10 KV or less. Specifications Cables insulated with HFDG-4201, using sound commercial fabrication practice, should meet the latest editions of the following industry cable specifications: ICEA: S-66-524/NEMA WC7 IEC: 60502 GB: 12706&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ASTM D792 |
| The degree of cross combination (Extractables) | < 20 | % | ASTM D2765A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 19.3 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 500 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| High temperature creep | < 100 | % | ICEA T-28-562 |
| thermosetting | < 10 | % | ICEA T-28-562 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric strength | ASTM D149 | ||
| 3.18 mm | 26 | kV/mm | ASTM D149 |
| 3.18 mm | 23 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 60 Hz | 2.30 | ASTM D150 | |
| Dissipation factor | |||
| 60 Hz | 5.0E-4 | ASTM D150 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 116 to 138 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method A (Short-Time) |
| 3. Method B (Step-by-Step) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |