About |
---|
HFFR 2003 is a Polyolefin material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Important attributes of HFFR 2003 are: RoHS Compliant Flame Retardant Halogen Free Typical application of HFFR 2003: Wire & Cable&& |
Product Description | |
---|---|
Supplier | Teknor Apex |
Generic | 聚烯烃,共挤薄膜用聚烯烃 |
Material Status | Commercial: Active |
Features | Halogen free,Flame Characteristics |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Process Methods | Extrusion |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.43 | g/cm³ | ASTM D792 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Embrittlement temperature | -38.0 | ℃ | ASTM D746 |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Volume resistivity | 2.2E+15 | ohms·cm | ASTM D257 |
Dielectric constant | |||
1 kHz | 3.81 | ASTM D150 | |
Dissipation factor | |||
1 kHz | 3.9E-3 | ASTM D150 |
FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
---|---|---|---|
Extreme oxygen index | 52 | % | ASTM D2863 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shore D, 10 seconds | 46 | ASTM D2240 | |
tensile strength | |||
fracture | 10.7 | MPa | ASTM D638 |
Tensile strain | |||
fracture | 230 | % | ASTM D638 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |