| About |
|---|
| HI-ZEX™ 1108J是一种高密度聚乙烯产品,。 它可以通过注射成型进行加工,在亚太地区、北美洲或欧洲有供货。 典型应用领域为:工业应用。 主要特性为:良好的刚度。&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good liquidity |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.961 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 8.0 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | 4.00 | hr | ASTM D1693 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 4.0 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 126 | ℃ | ISO 306 |
| Melting temperature | 134 | ℃ | ISO 11357-3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, injection molding | 65 | ISO 868 | |
| Tensile modulus | |||
| injection molding | 1300 | MPa | ISO 527-2 |
| tensile strength | |||
| Yield, injection molding | 27.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, injection molding | > 500 | % | ISO 527-2 |
| Bending modulus | |||
| injection molding | 1300 | MPa | ISO 178 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |