| About |
|---|
| HIDEN® P502 is a High Density Polyethylene material. It is available in Asia Pacific. Important attributes of HIDEN® P502 are: Creep Resistant Good Flexibility Typical application of HIDEN® P502: Plumbing/Piping/Potable Water&& |
| Product Description | |
|---|---|
| Supplier | YUHWA |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good flexibility |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.939 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.15 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| balance | < 0.010 | % | ASTM D570 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| Condition B | > 5000 | hr | ASTM D1693 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | > 490 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 57.0 | ℃ | ASTM D648 |
| Embrittlement temperature | < -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 120 | ℃ | ASTM D1525 |
| Melting peak temperature | 130 | ℃ | ASTM D3418 |
| Linear coefficient of thermal expansion | |||
| MD | 1.5E-4 | 1/℃ | ASTM D696 |
| Oxygen sensing time | |||
| 200℃ | > 40 | min | ASTM D3895 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 58 | ASTM D2240 | |
| tensile strength | |||
| yield | 19.1 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 600 | % | ASTM D638 |
| Bending modulus | 588 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 100% |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |