About |
---|
Hifax CA60A NA 848 BLACK is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’s proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. Due to the high fluidity, Hifax CA60A NA 848 BLACK shows high compatibility to fillers and to flame retardant additives as well as to other polyolefins.&& |
Product Description | |
---|---|
Supplier | LyondellBasell |
Generic | 聚烯烃,共挤薄膜用聚烯烃 |
Material Status | Commercial: Active |
Features | Excellent Processability,Good flexibility,High impact resistance,High liquidity,Soft |
Availabilitys | North America |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.890 | g/cm³ | ISO 1183/A |
Melt Flow Rate | |||
230℃,2.16kg | 14 | g/10min | ISO 1133 |
IMPACT | Nominal value | Unit | Test method |
---|---|---|---|
Charpy Notched Impact Strength | |||
-30℃ | 无断裂 | ||
23℃ | 无断裂 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Hot deformation temperature | |||
0.45 MPa, unannealed | 40.0 | ℃ | ISO 75-2/B |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s A | 95 | ISO 868 | |
Tensile modulus | |||
23℃ | 150 | MPa | ISO 527-2 |
tensile strength | |||
Fracture, 23 ℃ | 7.50 | MPa | ISO 527-2 |
Tensile strain | |||
Fracture, 23 ℃ | 600 | % | ISO 527-2 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |