Hifax CA7441A - SOLIAO

About
Hifax CA 7441 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’s proprietary Catalloy process technology. It is suitable for extrusion processes. It exhibits low stiffness, low hardness, combined with a high melting point and low fluidity. The grade is available in natural pellet form.&&

Product Description
Supplier	LyondellBasell
Generic	聚烯烃，共挤薄膜用聚烯烃
Material Status	Commercial: Active
Features	Low liquidity,Good Dimensional Stability,Low temperature toughness
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.880	g/cm³	ISO 1183/A
Melt Flow Rate
230℃，2.16kg	0.80	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/1A
-40℃	70	kJ/m²	ISO 180-1A
23℃	无断裂		ISO 180/1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	40.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	57.0	℃	ISO 306/A50
Melting temperature	160	℃	ISO 11357-3

MECHANICAL	Nominal value	Unit	Test method
Shore hardness	28		ISO 868
tensile strength
Fracture, 23 ℃	> 11.0	MPa	ISO 527-2
Tensile strain
fracture	> 500	%	ISO 527-2
Bending modulus	100	MPa	ISO 178

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.