Hifax EKS 226P

About
“Hifax EKS 226P” is an unfilled UV stabilised Polypropylene copolymer for injection molding. It combines low stiffness/with excellent impact properties and good flowability. The grade has been specifically designed for molding of automotive exterior parts that requires very good low temperature impact behavior. The grade is available in color-matched, pellet form.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,High impact resistance,Good Dimensional Stability,Good liquidity,Copolymer,low-temperature impact resistance
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.890	g/cm³	ISO 1183
Melt Flow Rate	13	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	14.0	MPa	ISO 527-2/50
Bending modulus	600	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/1A
-40℃	7.5	kJ/m²	ISO 180-1A
23℃	无断裂		ISO 180/1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	60.0	℃	ISO 75-2/B

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.