Hifax X M2 U16

About
Hifax X M2 U16 is a 20% mineral filled, polypropylene grade for injection molding. The grade features very high stiffness and good scratch resistance. The grade has good UV resistance designed for outdoor applications. Typical customer applications are cowl vent grills. The grade is available in colored, pellet form.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,High scratch resistance,Homopolymer
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	12	g/10min	ISO 1133
Melt Volume Rate
230℃，2.16 kg	14.0	cm³/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23 ℃, completely fractured	3.0	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	34	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	120	℃	ISO 75-2/B
1.8 MPa, unannealed	66.0	℃	ISO 75-2/A

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	71.0	MPa	ISO 2039-1
Tensile modulus
Secant	2750	MPa	ISO 527-2
tensile strength			ISO 527-2/50
yield	32.0	MPa	ISO 527-2/50
fracture	26.0	MPa	ISO 527-2/50
Tensile strain			ISO 527-2/50
yield	5.5	%	ISO 527-2/50
fracture	24	%	ISO 527-2/50
Bending modulus
Secant	2900	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.