HiFill® PEI GF10

About
HiFill® PEI GF10 is a Polyether Imide (PEI) product filled with 10% glass fiber. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated.&&

Product Description
Generic	Polyetherimide
Material Status	Commercial: Active
Features	V-0
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.34	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	0.50	%	ASTM D955
Water absorption rate
24hr	0.22	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	121	MPa	ASTM D638
Bending modulus	5170	MPa	ASTM D790
bending strength	203	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	53	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	210	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	141	°C
Drying time	3.0	hr
Barrel rear temperature	357 to 391	°C
Barrel middle temperature	357 to 391	°C
Barrel front temperature	357 to 391	°C
Processing (melt) temperature	354 to 388	°C
Mold temperature	135 to 163	°C
Back pressure	0.345 to 0.689	MPa
Screw speed	50 to 100	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.