HiFill® POM 0212 B

About
HiFill® POM 0212 B is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in North America. Primary characteristic: copolymer.&&

Product Description
Generic	Copolymer Polyformaldehyde
Material Status	Commercial: Active
Features	Copolymer,High density
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.11	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	1.4	%	ASTM D955
Water absorption rate
24hr	0.10	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	44.8	MPa	ASTM D638
Tensile strain
fracture	1.0	%	ASTM D638
Bending modulus	2280	MPa	ASTM D790
bending strength	48.3	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	43	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	154	℃	ASTM D648
1.8 MPa, unannealed	107	℃	ASTM D648

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+13 to 1.0E+14	ohms·cm	ASTM D257

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.