HiFill® PP 0121 B

About
HiFill® PP 0121 B is a Polypropylene product filled with filler. It can be processed by injection molding and is available in North America.&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.21	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238
Shrinkage rate
MD：3.2 mm	1.5	%	ASTM D955
Water absorption rate
24hr	0.050	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	27	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	62.8	℃	ASTM D648
0.45 MPa, unannealed	107	℃	ASTM D648
Linear coefficient of thermal expansion
MD	3.4E-5	1/℃	ASTM D696

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	20.7	MPa	ASTM D638
Tensile strain
fracture	30	%	ASTM D638
Bending modulus	2410	MPa	ASTM D790
bending strength	35.9	MPa	ASTM D790
Rockwell hardness
R-level	95		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.