HIFOR® LT74119

About
WESTLAKE HIFOR Polyethylene LT74119 is a high strength linear low density polyethylene containing medium slip and high antiblock and it contains processing aid. It is designed for blown applications and is well suited for consumer and industrial packaging markets which require impact and tear strength. Films produced usign LT74119 exhibit low imperfections and facilitate production at thinner guages.&&

About

WESTLAKE HIFOR Polyethylene LT74119 is a high strength linear low density polyethylene containing medium slip and high antiblock and it contains processing aid. It is designed for blown applications and is well suited for consumer and industrial packaging markets which require impact and tear strength. Films produced usign LT74119 exhibit low imperfections and facilitate production at thinner guages.&&

Product Description
Supplier	Westlake Chemical
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Good tear strength
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D4883
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
Secant modulus			ASTM D882
1% secant, MD	220	MPa
1% secant, TD	241	MPa
tensile strength			ASTM D882
MD, fracture	50.0	MPa
TD, fracture	39.0	MPa
Tensile strain			ASTM D882
MD, fracture	750	%
TD, fracture	1000	%
Drop hammer impact	170	g	ASTM D1709

optical performance	Nominal value	Unit	Test method
gloss
45°	45		ASTM D2457
Haze	14	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.