| About |
|---|
| The HTR/OR Series is your material solution for applications requiring high temperature and oil resistance. Typical applications Closures Fastenings Flexible Connections Seals Material advantages Excellent heat resistance up to 150 °C Excellent resistance againstmotor and gearbox oil For injection molding Recyclable&& |
| Product Description | |
|---|---|
| Supplier | KRAIBURG |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Renewable resources,High Heat Resistance,Grease resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 5.00 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 300 | % | ISO 37 |
| tear strength | 14 | kN/m | ISO 34-1 |
| Compression deformation | ISO 815 | ||
| 23℃，72 hr | 30 | % | ISO 815 |
| 70℃，24 hr | 54 | % | ISO 815 |
| 100℃，24 hr | 58 | % | ISO 815 |
| 120℃，24 hr | 64 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 58 | ISO 7619 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 105 | °C | |
| Drying time | 2.0 | hr | |
| Recommended maximum moisture content | 0.050 | % | |
| Barrel rear temperature | 210 | °C | |
| Barrel middle temperature | 220 | °C | |
| Barrel front temperature | 230 | °C | |
| Mold temperature | 40 to 60 | °C | |
| Injection pressure | 120 to 200 | MPa | |
| Back pressure | 2.00 to 5.00 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type S2, 7,9 in/min |
| 3. Method Bb, Angle (Nicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |