HIPLEX® HHM 5502

About
HIPLEX® HHM 5502, copolymer of ethylene and hexene, with medium molecular weight and medium molecular weight distribution, is blow moulding grade for production of small and medium size containers. HIPLEX® HHM 5502 has good rigidity, hardness, impact strength, environmental stress cracking resistance, and excellent processability. HIPLEX®HHM 5502 is suitable for production of small and medium size containers for packaging of bleach, chemicals and most of detergents. It is not recommended for heavy-duty detergents. HIPLEX® HHM 5502 has Health Certificate issued by Institute for Health Protection of Serbia. Also, HIPLEX®HHM 5502 has Statement of Conformity, which declares product’s conformity with the European norms for materials intended to come into contact with foodstuffs. Statement of Conformity is issued by Institute for Public Health, Maribor, Slovenia.&&

About

HIPLEX® HHM 5502, copolymer of ethylene and hexene, with medium molecular weight and medium molecular weight distribution, is blow moulding grade for production of small and medium size containers. HIPLEX® HHM 5502 has good rigidity, hardness, impact strength, environmental stress cracking resistance, and excellent processability. HIPLEX®HHM 5502 is suitable for production of small and medium size containers for packaging of bleach, chemicals and most of detergents. It is not recommended for heavy-duty detergents. HIPLEX® HHM 5502 has Health Certificate issued by Institute for Health Protection of Serbia. Also, HIPLEX®HHM 5502 has Statement of Conformity, which declares product’s conformity with the European norms for materials intended to come into contact with foodstuffs. Statement of Conformity is issued by Institute for Public Health, Maribor, Slovenia.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Renewable resources,Good Hardness,Copolymer,Hexene copolymers,High ESCR
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.955	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.35	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
Condition B, F50	> 40.0	hr	ISO 22088

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	80	J/m	ISO 180

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	127	℃	ISO 306

Supplementary information	Nominal value	Unit	Test method
Blowing molding temperature	170 to 205	℃

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ISO 868
tensile strength			ISO 527-2
yield	27.0	MPa	ISO 527-2
fracture	28.0	MPa	ISO 527-2
Tensile strain
fracture	800	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.