HIPLEX® HXM 50100

About
HIPLEX® HXM 50100, copolymer of ethylene and hexene, extra high molecular weight and medium molecular weight distribution, is material with the best balance of stress cracking resistance, rigidity and melt strength. HIPLEX® HXM 50100 has very good processability. APPLICATION: HIPLEX® HXM 50100 is recommended for medium and large blow moulding products. It is suitable for the manufacture of containers for transport and storage of different chemicals. It is especially suitable for packaging of food. HIPLEX®HXM 50100 has Health Certificate issued by Institute for Health Protection of Serbia.&&

About

HIPLEX® HXM 50100, copolymer of ethylene and hexene, extra high molecular weight and medium molecular weight distribution, is material with the best balance of stress cracking resistance, rigidity and melt strength. HIPLEX® HXM 50100 has very good processability. APPLICATION: HIPLEX® HXM 50100 is recommended for medium and large blow moulding products. It is suitable for the manufacture of containers for transport and storage of different chemicals. It is especially suitable for packaging of food. HIPLEX®HXM 50100 has Health Certificate issued by Institute for Health Protection of Serbia.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Renewable resources,Food contact compliance,Good melt strength,Ultra high molecular weight,Copolymer,Hexene copolymers,High ESCR
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.955	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	10	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
F50	> 500	hr	ASTM D1693B

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	无断裂		ISO 180

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	127	℃	ISO 306/B

Supplementary information	Nominal value	Unit	Test method
Blowing molding temperature	180 to 220	℃

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	64		ISO 868
tensile strength			ISO 527-2
yield	26.0	MPa	ISO 527-2
fracture	30.0	MPa	ISO 527-2
Tensile strain
fracture	700	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.