HIPOLEN P® MA 1ST

About
HIPOLEN P® MA 1ST是一种聚丙烯均聚物(PP Homopoly)产品,。它可以通过注射成型进行加工,在非洲和中东或欧洲有供货。 HIPOLEN P® MA 1ST的应用领域包括厨房用具和容器。特性包括: 高光泽度透明度&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,Weight distribution
Availabilitys	Africa & Middle East ,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，1.20kg	40	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile strain
fracture	31	%	ASTM D638
Bending modulus	1200	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	35	J/m	ASTM D256

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.