| About |
|---|
| HiPrene® MT42IN is a 20% mineral filled, elastomer modified polypropylene compound suitable for injection moulding. This material has very good impact/stiffness balance and it’s easy to process. This material is paintable and is primarily designed to automotive interior parts like a dashboard and instrumental panel. This grade is available in natural or color- matched, pellet form.&& |
| Product Description | |
|---|---|
| Supplier | GS Caltex |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Rigidity,High impact resistance,Sprayable,Good Dimensional Stability |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| 1.05 | g/cm³ | ISO 1133 | |
| Melt Flow Rate | |||
| 2.16Kg，230℃ | 12 | g/10min | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength | |||
| Yield yld | 23 | MPa | ISO 527 |
| Tensile Elongation | 170 | % | ISO 527 |
| Flexural Modulus | 2100 | MPa | ISO 178 |
| Rockwell hardness | 70 | R Scale | ISO 2039 |
| Flexural strength | 35 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃ | 31 | J/m | ISO 180 |
| -10℃ | 5.5 | J/m | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa | 105 | ℃ | ISO 75 |
| Process Conditions | |||
|---|---|---|---|
| Injection molding | Nominal value | Unit | Test method |
| Rear Temperature | 190-210 | ℃ | |
| Middle Temperature | 190-220 | ℃ | |
| Front Temperature | 200-240 | ℃ | |
| Nozzle temperature | 210-250 | ℃ | |
| Mold Temperature | 25-50 | ℃ | |
| Injection speed | 低速to中速 | ||
| Injection pressure | 80-150 | bar | |
| Back Pressure | 10-20 | bar | |
| Holding Pressure | 20-80 | bar | |
| Feeding temperature | 40-80 | ℃ | |
| Melt Temperature | 200-250 | ℃ | |
| Screw speed | 低速to中速 | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |