Hiprolon® 211 ESNWHL P40

About
Hiprolon® 211 ESNWHL P40 is a polyamide produced from a renewable source. This black grade is plasticized and designed for extrusion.&&

Product Description
Supplier	Arkema
Generic	PA 1010
Material Status	Commercial: Active
Features	Renewable resources
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ISO 1183
Water absorption rate
Equilibrium, 23 ℃, 50% RH	0.90	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	> 50.0	MPa	ISO 527-2
Tensile strain
fracture	> 300	%	ISO 527-2
Bending modulus	320	MPa	ISO 178

IMPACT	Nominal value	Test method
Charpy Notched Impact Strength
23℃	无断裂	ISO 179/1eA
Charpy Unnotch Impact strength		ISO 179/1eU
-30℃	无断裂
23℃	无断裂

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	45.0	℃	ISO 75-2/A
Melting temperature	182	℃	ISO 11357-3

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+13	ohms·cm	IEC 60093

Supplementary information	Nominal value	Unit	Test method
ISO Shortname	PA 1010-P, EHL, 22-003		ISO 1874
Renewable Carbon Conent	> 80	%	ASTM D6866

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	80.0 to 90.0	°C
Drying time	4.0	hr
Melt temperature	210 to 260	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.