| About |
|---|
| HIPTEN® 21018A6 is low density polyethylene resin developed for production of thin blown film. HIPTEN® 21018A6 has extraordinary optical properties and very good mechanical properties, good processability and heat sealability. The addition of slip and antiblock agents results in good sliding and antiblocking properties of produced film. HIPTEN® 21018A6 has high clarity and is suitable for packaging for a wide variety of goods. HIPTEN® 21018A6 has Health Certificate issued by Institute for Health Protection of Serbia. Also, has Statement of Conformity, which declares product’s conformity with the European norms for materials intended to come into contact with foodstuffs. Statement of Conformity is issued by Institute for Public Health, Maribor, Slovenia.&& |
| Product Description | |
|---|---|
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good heat sealing,Smoothness,Renewable resources,Optical performance,High anti-blocking |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.921 | g/cm³ | ISO 1183/D |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 40 | µm | |
| tensile strength | ISO 1184 | ||
| TD, yield, 40 µ m | 10.0 | MPa | ISO 1184 |
| MD, fracture, 40 µ m | 23.0 | MPa | ISO 1184 |
| TD, fracture, 40 µ m | 18.0 | MPa | ISO 1184 |
| Tensile strain | ISO 1184 | ||
| fracture | 600 | % | ISO 527-2 |
| MD, fracture, 40 µ m | 500 | % | ISO 1184 |
| TD, fracture, 40 µ m | 700 | % | ISO 1184 |
| Drop hammer impact | |||
| 40 µm | 120 | g | ASTM D1709-A |
| tear strength | ASTM D1922 | ||
| MD，40 µm | 135.1 | kN/m | ASTM D1922 |
| TD，40 µm | 173.7 | kN/m | ASTM D1922 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 96.0 | ℃ | ISO 306 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 46 | ISO 868 | |
| tensile strength | ISO 527-2 | ||
| yield | 10.0 | MPa | ISO 527-2 |
| fracture | 14.0 | MPa | ISO 527-2 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 160 to 180 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Blown Film |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |