| About |
|---|
| HIVAL® 506060 NT is a High Density Polyethylene material. It is available in North America for injection molding. Primary attribute of HIVAL® 506060 NT: Food Contact Acceptable. Typical application of HIVAL® 506060 NT: Food Contact Applications&& |
| Product Description | |
|---|---|
| Supplier | Nexeo |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Food contact compliance |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.965 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 8.0 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent, F50 | < 3.00 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 1% cut, molded | 931 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 16 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 1720 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| -40℃ | 48 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 48.9 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 85.0 | ℃ | ASTM D648 |
| Melting temperature | 118 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 232 | °C | |
| Barrel middle temperature | 243 | °C | |
| Barrel front temperature | 243 | °C | |
| Nozzle temperature | 246 | °C | |
| Processing (melt) temperature | 243 | °C | |
| Mold temperature | 7 to 18 | °C | |
| Injection pressure | 2.76 to 10.3 | MPa | |
| Back pressure | 1.03 to 3.45 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |