HIVAL® 521054

About
HIVAL® 521054 is a High Density Polyethylene material. It is available in North America for injection molding. Important attributes of HIVAL® 521054 are: RoHS Compliant BPA Free Food Contact Acceptable Typical applications include: Consumer Goods Food Contact Applications Household Applications Trays/Racks&&

Product Description
Supplier	Nexeo
Generic	HDPE
Material Status	Commercial: Active
Features	Food contact compliance,No BPA
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.954	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	20	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ASTM D2240
tensile strength
yield	21.4	MPa	ASTM D638
Bending modulus
1% secant	862	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	35	J/m	ASTM D256

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	232	°C
Barrel middle temperature	243	°C
Barrel front temperature	243	°C
Nozzle temperature	246	°C
Processing (melt) temperature	243	°C
Mold temperature	7 to 18	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.