HIVAL® FL19 NT

About
HIVAL® FL19 NT is a Low Density Polyethylene material. It is available in North America for extrusion coating or injection molding. Important attributes of HIVAL® FL19 NT are: RoHS Compliant BPA Free Food Contact Acceptable Typical applications include: Caps/Lids/Closures Consumer Goods Containers Food Contact Applications Household Applications&&

Product Description
Supplier	Nexeo
Generic	LDPE
Material Status	Commercial: Active
Features	Food contact compliance,No BPA
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.919	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	9.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	45		ASTM D2240
tensile strength
yield	9.65	MPa	ASTM D638
Bending modulus	245	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
-20℃	910	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	40.0	℃	ASTM D648
Embrittlement temperature	-65.0	℃	ASTM D746

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	163	°C
Barrel middle temperature	171	°C
Barrel front temperature	177	°C
Nozzle temperature	177	°C
Processing (melt) temperature	177	°C
Mold temperature	7 to 24	°C
Injection pressure	2.76 to 10.3	MPa
Back pressure	1.03 to 3.45	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.