Honghai CM 352L

About
This product is a kind of saturated thermoplastic elastomer with irregular structure, almost no crystal. It features lower plasticizing temperature and Mooney viscosity, excellent processing flowability, good heat resistance, weatherability, flex durability and flame retardancy. It not only can be used as halogen rubber alone but also can be used with CR, CSM, NBR, SBR, NR and so on together by mixing in random proportion. This product not only can be used for special synthetic rubber but also can be used for modifier of general-purposed synthetic rubber and plasticizer of PVC etc. It can be used for making all kinds of wires, cable sheath, rubber hose, flame retarding conveyor belt, rubber wares, seal strip of adhesive board, insulation of wires and cables and waterproof membrane for roof etc.&&

Product Description
SupplierHonghai
GenericCPE
Material StatusCommercial: Active
FeaturesWeather resistance is good,Good flexibility,Good liquidity,Flame Characteristics,Durability,Heat Resistance, Good
AvailabilitysAsia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Mooney viscosity
ML 1+4,125℃45 to 55MUGB/T 1232
Chlorine content34.0 to 36.0wt%GB/T 7139
decomposition temperature> 165HG/T 2704
Sieve Residue(20 Mesh)< 2.0%GB/T 2916

THERMALNominal valueUnitTest method
Fusion heat< 2.00J/gDSC

Supplementary informationNominal valueUnitTest method
volatility< 0.50%GB/T 2914

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A< 56 GB/T 2411
tensile strength> 6.00MPaGB/T 528
Tensile strain
fracture> 700%GB/T 528

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.