HOPELEN FI-150

About
HOPELEN FI-150是由Spheripol工艺生产的聚丙烯均聚物。此等级应用于高滑动产品。

Product Description
Supplier	LOTTE
Generic	PP homopolymerization
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.90	g/cm³	ASTM D792
Melt Flow Rate	11.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	100		ASTM D785
tensile strength
yield	34.3	MPa	ASTM D638
Tensile stress (fracture)	>500	%	ASTM D638
Bending modulus	1568	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa	104	℃	ASTM D648
melting point	162	℃	LOTTE’S

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	29.4	J/m	ASTM D256

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.