HOPELEN JC-160

About
JC-160 is homo polymer resin produced through the polymerization of propylene. This grade is designed to be processed in conventional Injection molding equipment. JC-160 shows good thermal stability and has high strength and stiffness. It is typically used in production of housewares and the general supplies. JC-160 is highly useful for use in high strength products which are exposed to lengthy periods of high temperatures. (UL746b authentication is in progress.)&&

About

JC-160 is homo polymer resin produced through the polymerization of propylene. This grade is designed to be processed in conventional Injection molding equipment. JC-160 shows good thermal stability and has high strength and stiffness. It is typically used in production of housewares and the general supplies. JC-160 is highly useful for use in high strength products which are exposed to lengthy periods of high temperatures. (UL746b authentication is in progress.)&&

Product Description
Supplier	LOTTE
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Heat Stabilized,Homopolymer
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792 , ISO 1183
Melt Flow Rate
230℃，2.16kg	20	g/10min	ASTM D1238，ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	39.2	MPa	ASTM D638
yield	36.3	MPa	ISO 527-2
Tensile strain
fracture	< 100	%	ASTM D638 , ISO 527-2
Bending modulus
—	2060	MPa	ASTM D790
—	1570	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
-10℃	20	J/m	ASTM D256
-10℃	15	J/m	ISO 180
23℃	34	J/m	ASTM D256
23℃	29	J/m	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	140	℃	ASTM D648
0.45 MPa, unannealed	120	℃	ISO 75-2/B

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.