| About |
|---|
| Easy Strippable Semiconductive Shielding E8406 is a vulcanzisable, easy-strippable semiconductive compound, designed for both XLPE and EPDM rubber insulated cables and use in both dry and steam curing processes. E8406 meets the requirements as below, when optimal processing extrusion and end testing procedure are used: AEIC-CS 5/94 IEC 840 BS 6622 NF CS 32/321 HN 33-S-23 (EDF) SS 424 14 16, SS424 14 17 (HD 620 S1:1996) IEC 502 VDE 0273 / 12.87&& |
| Product Description | |
|---|---|
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Conductive,Good dissection,Steam Cure,Baking |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.21 | g/cm³ | ASTM D1928 |
| water content | < 800 | ppm | Internal Method |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air | |||
| 135℃，168 hr | -5.0 | % | ASTM D638 |
| The rate of change in ultimate elongation in air | |||
| 135℃，168 hr | -25 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| thermosetting | |||
| 200℃ | 50 to 70 | % | IEC 60540 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | ASTM D257 | ||
| 23℃ | < 5.0E+2 | ohms·cm | ASTM D257 |
| 90 ℃ | < 1.0E+3 | ohms·cm | ASTM D257 |
| 120 ℃ | < 1.0E+3 | ohms·cm | ASTM D257 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 85 to 90 | ASTM D2240 | |
| tensile strength | 13.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 240 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | < 40 | °C | |
| Barrel 1 zone temperature | 60 to 110 | °C | |
| Barrel 2 zone temperature | 60 to 110 | °C | |
| Barrel 3 zone temperature | 60 to 110 | °C | |
| Barrel 4 zone temperature | 60 to 110 | °C | |
| Barrel 5 zone temperature | 60 to 110 | °C | |
| Nozzle temperature | 100 to 130 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. QAHC-10420 (Karl Fischer method) |
| 3. 20 N/cm² |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |