Hostacom EYC 772N 110E BLACK

About
Hostacom EYC 772N 110E BLACK very high melt flow, mineral-filled polypropylene copolymer has a good balance of properties and processability. It is typically used for automotive interior applications that require high rigidity and good scratch and mar resistance.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High liquidity,Copolymer,High scratch resistance
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	35	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	25.0	MPa	ISO 527-2
Bending modulus	2600	MPa	ISO 178

IMPACT	Nominal value	Unit
Impact strength of cantilever beam notch
-30℃	2.5	kJ/m²
23℃	7.0	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	112	℃	ISO 75-2/B

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.