Hostalen ACP 5331 H

About
Hostalen ACP 5331 H is a state of the art HDPE resin, produced by latest Hostalen ACP technology. Hostalen ACP 5331 H is easy processable on injection moulding and compression moulding equipment. Exceptional organoleptic properties and a good balance of stiffness, toughness and environmental stress cracking resistance make Hostalen ACP 5331H the choice of customers for the production of closures for sparkling water, CSD and many other types of food and non-food caps and closures as well as tube shoulders. This grade is not intended for use in medical or pharmacuetical applications.&&

About

Hostalen ACP 5331 H is a state of the art HDPE resin, produced by latest Hostalen ACP technology. Hostalen ACP 5331 H is easy processable on injection moulding and compression moulding equipment. Exceptional organoleptic properties and a good balance of stiffness, toughness and environmental stress cracking resistance make Hostalen ACP 5331H the choice of customers for the production of closures for sparkling water, CSD and many other types of food and non-food caps and closures as well as tube shoulders. This grade is not intended for use in medical or pharmacuetical applications.&&

Product Description
Supplier	LyondellBasell
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Food contact compliance,Good sensory characteristics.,High ESCR
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.953	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，2.16kg	2.1	g/10min	ISO 1133
190℃，5.0kg	6.3	g/10min	ISO 1133
Full incision creep test
50℃	> 9.0	hr	Internal Method

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
-30℃	5.0	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B50	75.0	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	62		ISO 868
Ball hardness
H 132/30	51.0	MPa	ISO 2039-1
Tensile modulus	1150	MPa	ISO 527-2
tensile strength
yield	30.0	MPa	ISO 527-2
Tensile strain
yield	10	%	ISO 527-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 230	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.