| About |
|---|
| Hostalen PP H2150 is the polypropylene HOMO polymer manufactured by PMC under the license of BASELL using the Spheripol process. Hostalen PP H2150 is a natural, nucleated polypropylene homopolymer with high melt viscosity for extrusion. The product has a high heat- and extraction stability. It is not intended for medical and pharmaceutical applications.&& |
| Product Description | |
|---|---|
| Supplier | PolyMirae |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | High impact resistance,High Viscosity,Nucleation,High Heat Resistance,Solvent resistance,Homopolymer |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 0.30 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ISO 180/A | ||
| -30℃ | 1.5 | kJ/m² | |
| 0℃ | 2.5 | kJ/m² | |
| 23℃ | 6.0 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 90.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| A50 | 150 | ℃ | ISO 306/A50 |
| Melting temperature | |||
| DSC | 165 | ℃ | ISO 3146 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 70 | ISO 868 | |
| Tensile modulus | 1400 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 31.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 9.0 | % | ISO 527-2/50 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |