| About |
|---|
| Product Description | |
|---|---|
| Supplier | Idemitsu |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 11 | g/10min | ISO 1133 |
| Density | 1.2 | g/cm³ | ISO 1183 |
| Water absorption rate | 0.23 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 65 | MPa | ISO 527 |
| Tensile strain | |||
| fracture | 95 | % | ISO 527 |
| bending strength | 90 | MPa | ISO 178 |
| Bending modulus | 2300 | MPa | ISO 178 |
| Rockwell hardness | |||
| R-level | 120 | ISO 2039-2 | |
| M-level | 50 | ISO 2039-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 80 | kJ/m² | ISO 179 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Total transmittance | 85-90 | % | ISO 13468-1 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 30 | kV/mm | IEC 60243-1 |
| Dielectric constant | 2.85 | IEC 60250 | |
| Dissipation factor | 0.0092 | IEC 60250 | |
| Volume resistivity | > 10E+16 | Ω・cm | ASTM D257 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |