| About |
|---|
| Operation: Injection molding Characteristics: Excellent physical properties, Abrasion resistance, Easy processing, Fast de-molding, Cold/Heat resistance, Great transparency Applications: (Transparent) Footwear, Sealing ring, Accessories, Protective gear, Cell-phone cover, Automotive, Compounding&& |
| Product Description | |
|---|---|
| Supplier | Huafon |
| Material Status | Commercial: Active |
| Features | Heat Resistance, Good,Excellent Processability,Good wear resistance,Good Clarity,Antifreeze |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | 91 | Shore A | ASTM D2240 |
| Tensile Strength | 32 | MPa | ASTM D412 |
| Tensile Elongation | 500 | % | ASTM D412 |
| Tear strength | 130 | kN/m | ASTM D412 |
| Tensile Modulus | |||
| 100% | 9.5 | MPa | ASTM D412 |
| Wear resistance | 100 | mm² | DIN 53516 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |