| About |
|---|
| Characteristics: Low density. high hardness Applications: For sandals.&& |
| Product Description | |
|---|---|
| Supplier | Huafon |
| Generic | PUR-酯 |
| Material Status | Commercial: Active |
| Features | Good Hardness,Low density |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.380 to 0.420 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| JIS Sponge A：23℃ | 50.0 to 56.0 | ||
| JIS Sponge C：23℃ | 65.0 to 70.0 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100 | ||
| Component B | 按重量计算的混合比: 90 to 92 |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | |||
| — | Clear/Transparent | ||
| — | White | ||
| Density | |||
| 40℃ | 1.14 to 1.18 | g/cm³ | |
| 40℃ | 1.18 to 1.20 | g/cm³ | |
| viscosity | |||
| 40℃ | 0.10 to 0.30 | Pa·s | |
| 40℃ | 1.2 to 1.8 | Pa·s |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 4.50 | MPa | |
| Tensile strain | |||
| fracture | > 250 | % | |
| tear strength | > 18.0 | kN/m |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Molded Density |
| 3. Part B |
| 4. Part A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |