| About |
|---|
| T27 is light medium viscosity resin. Typical Applications T27 is broadly used in product of nylon 66 monofilament, staple, carpet yarn. as well as in compounding plastics.&& |
| Product Description | |
|---|---|
| Supplier | Huafon |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | V-2 |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 275℃，2.16kg | 66 | g/10min | ISO 1133 |
| water content | Internal Method | ||
| Dry chip | ppm | ||
| Wet chip | ppm | ||
| Particle size | 1.40 to 2.00 | g/100 pellets | Internal Method |
| Relative viscosity | Internal Method | ||
| Dry chip | 2.66 to 2.74 | ||
| Wet Chips | 2.61 to 2.69 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 75.8 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 66 | % | ISO 527-2 |
| Bending modulus | 2640 | MPa | ISO 178 |
| bending strength | 99.9 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 6.2 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, annealed | 185 | ℃ | ISO 75-2/B |
| 1.8 MPa, annealed | 68.4 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| B120 | 240 | ℃ | ISO 306/B120 |
| Melting peak temperature | 267 | ℃ | ASTM D3418 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.00 mm | V-2 | ||
| 1.60 mm | V-2 | ||
| 3.00 mm | V-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 48h/23°C/50%RH |
| 3. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |