HX5350 - SOLIAO

About
对应科思创的T65,适合汽车部件

Product Description
Generic	PC+ABS
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³	ISO 1183
Shrinkage rate
MD	0.5-0.7	%	ISO 294
TD	0.5-0.7	%	ISO 294

MECHANICAL	Nominal value	Unit	Test method
tensile strength
50 mm/min	54	MPa	ISO 527
Tensile strain
Fracture, 50 mm/min	50	%	ISO 527
bending strength
50 mm/min	84	MPa	ISO 178
Bending modulus
50 mm/min	2235	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Melt Flow Rate
260℃，5.0kg	21	g/10min	ISO 1133
Hot deformation temperature
0.45 MPa	120	℃	ISO 75
1.8 MPa	110	℃	ISO 75
Vicat Softening Temp
B50	120	℃	ISO 306

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	52	KJ/m²	ISO 180
Izod notched impact strength
23℃	NB	KJ/m²	ISO 180

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.