HX8295 - SOLIAO

About
对应SABIC的C2950,阻燃性能优良，无卤阻燃，耐高温，优异的加工性能

Product Description
Generic	PC+ABS
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.18	g/cm³	ISO 1183
Shrinkage rate
MD	0.5-0.7	%	ISO 294
TD	0.5-0.7	%	ISO 294

MECHANICAL	Nominal value	Unit	Test method
tensile strength
50 mm/min	62	MPa	ISO 527
Tensile strain
Fracture, 50 mm/min	70	%	ISO 527
bending strength
50 mm/min	93	MPa	ISO 178
Bending modulus
50 mm/min	2435	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Melt Flow Rate
260℃，5.0kg	12	g/10min	ISO 1133
Hot deformation temperature
0.45 MPa	111	℃	ISO 75
1.8 MPa	100	℃	ISO 75
Vicat Softening Temp
B50	115	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	V-0		UL 94

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	56	KJ/m²	ISO 180
Izod notched impact strength
23℃	NB	KJ/m²	ISO 180

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.