| About |
|---|
| Description: Clear flexible, Non-phthalate PVC extrusion compound Colour: Clear and tints Application: Low toxicity, food contact and general purpose extrusions. Specification: Additives used in this compound are listed for food contact use by US FDA + BGA. Material complies with the migration requirements of 2002/72/EC and its amendments Form: Granules&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility,Low toxicity,Food contact compliance,Soft |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | BS 2782 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature flexibility | -44 | ℃ | BS 2782 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Migration | EN 1186-3 | ||
| 50% Ethanol，1 hour：40℃ | 2.10 | mg/dm² | EN 1186-3 |
| 50% Ethanol，10 mins：40℃ | 1.10 | mg/dm² | EN 1186-3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds, 23 ℃ | 59 | BS 2782 | |
| tensile strength | |||
| yield | 11.8 | MPa | BS 2782 |
| Tensile strain | |||
| fracture | 350 | % | BS 2782 |
| BS Softness（BSS°） | 74 | BS 2782 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 130 | °C | |
| Barrel 2 zone temperature | 135 | °C | |
| Barrel 3 zone temperature | 145 | °C | |
| Nozzle temperature | 150 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Varies with colour |
| 3. 20 in/min |
| 4. Material tested to current EC regulations (directive 2002/72/EC and its amendments) using a total immersion method (EN1186, part 3) in 50% ethanol at 40°C for time periods of 10 mins and 1 hour. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |